Campus blog of College of Engineering Kallooppara
Articles
All technical articles
REPORT OF MICROSOFT’S WEBCAST ON WINDOWS PHONE 7
Nov 29th
IEEE students branch of college of engineering kallooppara hosted Microsoft’s tech talk on 22nd October and 29th October 2010.it was held in computer lab -1 of our college. it was a very nice talk so that we came to knew about the Microsoft s new smart phone. On the first day the class was taken by Sidharth Sehgal of Microsoft . He introduced the windows phone 7, XNA and silver light application development. Thus we got a clear view about the new phone which will have an impact on the global market.25 students participated in this session. After the session there is question and answer session so that the students can ask doubts. some of the questions that are raised by our students are given below.
1. What are the features of the windows phone 7 over the apples i phone?
2. What are the software and hardware specifications?
We got clear answers for these questions from the speaker…the session ended at 5:30pm.
The second part of the talk was conducted on the October 29th.it was conducted by mukul kumar gupta of Microsoft. The talk started at sharp 4pm.He started with the introduction to the applications development of windows phone 7.He showed us some presentations on how to build simple light weight applications using silver light. the talk ended at 5 pm.Total of 30 students from our college has participated in the midst of university exams for this session.
We extend our sincere thanks to all those who are behind this event and helped to make it a big success. last but not the least we give the sincere thanks to the god almighty.
From,
Roshan issac
COMPUTER SOCIETY
IEEE-CEK
A to Z of Graduate Study in US
Oct 20th
International students who come here for graduate studies find themselves in a totally different environment than they are used to back in their home country. Here is a comprehensive list of what you need to know when you come for graduate studies in US.
Assignment: Once a semester starts, a graduate student shall be doing at least one assignment a week. Most of the assignments may not be that easy as your undergraduate assignments back in your home country. Again if one starts working on it just the day before the submission, one may not finish it in time. For most of the courses, assignment plays a big role in the overall grades.
Bike: Bike or the bicycle is most probably going to be your mode of transportation during your study days in US. It is the cheapest and the fastest vehicle available for a graduate student to go from one point to another.
Credit Card: Your best friend in times of economic stress during your graduate studies. At least once during your studies you may be forced to use the credit card. Always remember one thing – if you don’t use it wisely it would land you in trouble forever.
Dollar: The scarce commodity in the hand of a graduate student. Always try to make both ends meet with whatever you have.
Exams: An integral part of the courses you take. Professors will be testing your practical knowledge rather than your theoretical knowledge as you are used to India. Initially you may find it tough but within few weeks you will get used to the system.
Fast Food: At least once in a week you shall be eating from either Burger King or Taco Bell or McDonalds – the reasons – you are too lazy to cook or you don’t have time to go home for lunch; whatever be the reasons the result of eating from these fast foods will show up on your body in a year or so as you start gaining lots of weight.
Google: Your life as a graduate student revolves around Google. Google has answers for many of your problems J
Hourly Job: The first thing a graduate student starts looking for once he/she lands in US – some are lucky to get an hourly job that can pay for the day to day expenses.
Internship: Getting an internship is the dream of any gradate student. In addition to a good pay, an internship offers real time experience that will be very helpful in the job search after your graduation.
Jobless: When you come to do your graduate studies be prepared for the worst case – not getting any job during the extended period of your studies. The key here is not to loose hope and keep searching.
Kitchen: Never ever cooked in your life time? OK, things are about to change. You will be cooking food on your own or else you cannot survive on the money you make as a student.
Laundry: You wash your own clothes in the laundry machines in the apartment. It might be a new experience for a few.
Manage: Very important factor to succeed. You may have to do so many things (study, hourly job, cooking etc) at the same time and one has to be a good “manager” to succeed in all those.
Night Out: You may have experiences of “Night Out” during your undergraduate studies. But now be prepared for many more “Night Outs” especially during the last few days of the semester.
OPT: OPT or Optional Practical Training is the work permit with which you can work without a visa for a year for all graduates and for 29 months for some graduates (graduates of STEM). OPT process has become complex over years and you will be talking a lot about it starting few months before your graduation.
Party: Graduate study is not all about studies, it is also about parties. Friday and Saturday nights are meant for partying and you are going to have a lot of fun during these parties.
Quality: Whatever it be – studies, hourly jobs or exams or assignments it is the quality of the work that matters. Always strive to produce quality work and rest assured that you will be coming out with flying colors.
Room Mates: Don’t even think of staying in an apartment on your own when you come here for graduate studies. You may have to share a room with one or two or three others depending on the location of the school and your financial conditions.
Soda: You start drinking soda more than water. In some shops it is cheaper than buying drinking water.
Travel: Spring and summer break (total of 4 months) are for travel. You have lots of places to visit in the US and this is the right time to go. A nice way to spend time away from school and studies.
USCIS: US Citizen and Immigration Services or USCIS is the agency where you need to send all your documents for processing your visa and other immigration papers. You will be hearing a lot about this during your study days in US.
Visa: You will be force to think/talk about this almost every day you are in US. The F1 visa status places a lot of restrictions on students and you will be reminded of your visa status during your entire stay in US.
Walmart: One stop shop for all your shopping needs. You get almost all the stuff you need and more importantly at a very low price.
Yardstick: You should be keeping a yardstick for yourself all through your studies and see that you achieve those yardsticks. If you cannot, you should look back and see why you could not meet them.
Zest: The most important thing – the zest or enthusiasm to accept the challenges you face during the graduate studies and zest to overcome it. If you have that zeal everything else will fall in place.
How To: Install Windows 7/Vista From USB Drive
Mar 19th
This guide works for both win 7 & vista…..
1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe location on your system.
2. Open Command Prompt with admin rights. Use any of the below methods to open Command Prompt with admin rights.
*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.
Or
*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run as administrator.
3. You need to know about the USB drive a little bit. Type in the following commands in the command prompt:
First type DISKPART and hit enter
Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. In the below screenshot my Flash Drive Disk no is Disk 1.
4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.
So below are the commands you need to type and execute one by one:
SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.
5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is “H” (open my computer to know about it).
6. Maximize the minimized Command Prompt in the 4th step.Type the following command now:
D: CD BOOT and hit enter.Where “D” is your DVD drive letter.
CD BOOT and hit enter to see the below message.
7. Type another command given below to update the USB drive with BOOTMGR compatible code.
BOOTSECT.EXE /NT60 H:
Where “H” is your USB drive letter. Once you enter the above command you will see the below message.
8. Copy your Windows 7/Vista DVD contents to the USB flash drive.
9. Your USB drive is ready to boot and install Windows 7/Vista. Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive.
How to setup Windows XP SP3 from USB drive
Mar 14th
Disclaimer
The procedure here is provided without any warranty or support. It worked for me and so it might for you. Some of the procedures described here can wipe all of your data. Thought I’d warn you.
Step #1: Prepping BartPE
First we’ll prep the USB drive we’ll be using for booting. This is by far the largest step in the process, though it shouldn’t be difficult for anyone to follow. It requires a functional Windows system.
1.Download BartPE builder from http://www.nu2.nu/pebuilder/
2. Install BartPE. We’ll be assuming that you install to C:\pebuilder.
3. Start PE Builder from the Start Menu. Point “Source:” to the location of your Windows XP setup files containing SP3.
Note: “Source:” is drive letter of your physical CD/DVD-ROM drive which is holding XP SP3 setup CD, a virtual drive mounted with XP SP3 ISO works as well
4. Make sure the “Output:” is set to “BartPE”.
5. Set “Media output” as “Craete ISO image” and filename as “c:\pebuilder\pebuilder.iso”
6. Hit “Build”.
7. When it’s done building, image file “c:\pebuilder\pebuilder.iso” should be created properly
Step #2: Creating bootable USB
1. Satrt UltraISO (V9.3 or newer version, download here)
2. Choose ‘File’->’Open’from main menu and open file “c:\pebuilder\pebuilder.iso”
3. Choose ‘Bootable’->’Write disk image’ from main menu
4.Insert the USB drive you intend to boot from
5. Choose proper “Write Method”,USB-HDD+ is recommanded
6. Hit “Write” to get a bootable USB drive
7. When it’s done, copy the Windows XP setup files to the USB drive. Please note that you’ll only need the i386 folder.
If no errors occured in the above process, you should now be all set to boot from USB!
Step #3: Configuring the BIOS
You should now reboot and go into the BIOS configuration to boot from USB. Instructions for doing so wildly from system to system, but generally entail the following:
1. Reboot the system.
2. While booting (before Windows starts loading), get into the BIOS configuration screen by hitting something like F1, F2, Delete or Escape. Hotkey instructions are generally provided on the screen.
3. Go to the section that contains your boot devices.
4. With your USB drive plugged in, the USB drive should be listed. If it isn’t, your system might not support booting from USB. Assuming that it is supported (as is the case with virtually all modern hardware), promote your USB drive to the primary boot device.
5. Exit from the BIOS configuration, saving all changes.
If you’re completely new to BIOS configuration, BIOS for Beginners over at Tom’s Hardware might be a good primer. Be aware though, that you can seriously screw up your system by providing incorrect settings!
Step #4: Booting into BartPE
Assuming that you properly configured your BIOS and your USB device supports booting, BartPE should now load. Depending on the speed of your USB device, this may take a while.
If it isn’t working, then double-check the following before making a scene:
• Is your BIOS properly configured for booting from the USB disk? (Is the USB device listed and does it have top priority?)
• Have you correctly prepared the USB disk in step two? (Restart the procedure.)
• Does your USB stick properly support being booted from? (Try another one!)
Step #5: Prepping the Hard Disk
You need to make sure that your hard drive is partitioned and formatted properly. Especially if you’ve had Linux or some other operating system on it, you’ll need to repartition and format it. BartPE contains DiskPart for disk partitioning and A43 File Manager to format your drive.
If you are sure that your hard drive is set up properly (i.e. it has only run Windows, it contains a valid FAT or NTFS partition) then you can safe yourself the hassle and skip this step.
This procedure will destroy any data on the hard drive.
To repartition:
1. From the Go menu, navigate to DiskPart.
2. Enter the commands needed to repartition your drive. For example, try the following: select disk 0 (select the first disk), clean (purges the entire drive, essentially resetting it), create partition primary (creates a single partition from the entire disk), assign (assign the partition a drive letter), exit (quits DiskPart).
This procedure will destroy any data on the hard drive.
To format:
1. From the Go menu, navigate to the A43 File Manager.
2. Right-click on the target drive (e.g. C:) and click Format. Should be self-explanatory.
Step #6: Launching Windows XP Setup from USB
With your drive all ready, you can now launch the Windows XP setup with a few custom parameters. Let’s assume that the files are available at X:\i386.
1. Run the following command:
X:\i386\winnt32.exe /syspart:C: /tempdrive:C: /makelocalsource /noreboot
2. Proceed with the installation. When asked to convert the installation volume to NTFS, answer No. The setup program incorrectly believes that your USB drive (which is formatted as FAT) needs conversion.
3. The setup program will then silently close, which might make you think that something went wrong. Don’t worry though.
Step #7: Continue Windows XP Setup from Harddisk
1. Reboot your system
2. Unplug USB drive during post stage
3. Change your BIOS setting back to boot from hard disk again as needed
4. You can now continue to finish setting up Windows XP.
Congratulations!
Connecting JSP with MySQL
Mar 9th
Its easy, but not so easy…follow it step by step on

